GDT + ISO GPS Full Learning Bootcamp From Rookies To Star

GD&T + ISO GPS Full Learning Bootcamp – From Rookies To Star, available at $59.99, has an average rating of 4.38, with 55 lectures, based on 389 reviews, and has 1962 subscribers.

You will learn about This course focuses the fundamental key content and requirements of ASME Y14.5-2018 and ISO GPS standards, such as ISO1101, ISO8015, etc. The whole training consists 60 modules covers size, form, orientation, position tolerance, datum, datum system, MMC/LMC applications, bonus tolerance, datum shift and composite tolerance, etc, it also touches the knowledge on geometric tolerance inspection, calculation and gage design This course is ideal for individuals who are Design Engineer, Quality Engineer, Process Engineer, Manufacturing Engineering, Gage Engineer, APQP team member, and Inspector, Sales and Marketing, Purchasing and university students It is particularly useful for Design Engineer, Quality Engineer, Process Engineer, Manufacturing Engineering, Gage Engineer, APQP team member, and Inspector, Sales and Marketing, Purchasing and university students.

Enroll now: GD&T + ISO GPS Full Learning Bootcamp – From Rookies To Star

Summary

Title: GD&T + ISO GPS Full Learning Bootcamp – From Rookies To Star

Price: $59.99

Average Rating: 4.38

Number of Lectures: 55

Number of Published Lectures: 55

Number of Curriculum Items: 55

Number of Published Curriculum Objects: 55

Original Price: $89.99

Quality Status: approved

Status: Live

What You Will Learn

This course focuses the fundamental key content and requirements of ASME Y14.5-2018 and ISO GPS standards, such as ISO1101, ISO8015, etc. The whole training consists 60 modules covers size, form, orientation, position tolerance, datum, datum system, MMC/LMC applications, bonus tolerance, datum shift and composite tolerance, etc, it also touches the knowledge on geometric tolerance inspection, calculation and gage design

Who Should Attend

Design Engineer, Quality Engineer, Process Engineer, Manufacturing Engineering, Gage Engineer, APQP team member, and Inspector, Sales and Marketing, Purchasing and university students

Target Audiences

Design Engineer, Quality Engineer, Process Engineer, Manufacturing Engineering, Gage Engineer, APQP team member, and Inspector, Sales and Marketing, Purchasing and university students

GD&T is the international language to describe the function of the parts, this language should precisely and uniquely specify the function of the parts as well as the feasibility of manufacturing and measurement.

This course is designed to help either beginners or intermediate GD&T users to reach the experienced level. The whole course has 60 modules, which is designed from fundamental level to advanced level. Each module is targeted to dive into each GD&T and GPS knowledge in detail and in depth by using practical drawing cases. Then all of this points will be linked together to build the systematic knowledge of GD&T/ISO GPS frame structure. We believe the philosophy, logic and relationship behind those various symbols is the key to make the learner to grasp the core understanding on GD&T/ISO GPS. Just understanding the definition of geometric tolerance is not enough, we will explore the meaning of each geometric symbol from the angle of relationship, application and function, such as common and difference of each tolerance, how to define the datum based on the function, how to define the tolerance based on the function, how to evaluate the parts, how to design the function gage to verify the parts. The training includes 12 work-shop quizzes to help the students improve practical application skills, we have provide final test to verify the learning effectiveness. Bonus GD&T & GPS videos will be offered to improve the understanding the specific knowledge point. Long term question and answer service will be provided for free.

This course mainly focus on ASME Y14.5-2018 and the key ISO GPS 1101/8015/5458/5459 contents are included. All of the teaching contend will be based on the latest GD&T and ISO GPS standard. Total 54 modules are developed as below:

Introduction

1. Introduction

Chapter 1

GD&T  Principles and Rules

2. GD&T and ISO GPS Systems  and Fundamental Rules

3. Datum and Datum Selection

4. Feature Control Frame,  Tolerance Zone and TED

5. Linear tolerance to define position

6 .Profile tolerance and Linear Tolerance

7. Feature of Size (FOS) and Size Tolerance

8. Maximum/Least Material Condition  (MMC and LMC)

9. Position Tolerance and Linear Tolerance

10. Position tolerance with MMC Modifier

11. Position tolerance with LMC Modifier

12. Virtual Condition Boundary(VC)

13. Envelope Requirements (Rule#1)

14. Quiz #1

15. Quiz #1 Answer

Chapter 2

Form Tolerance

16. Flatness

17. Straightness

18. Circularity

19. Cylindricity

20. Quiz #2

21. Quiz #2 and answer

Chapter 3

Datum and Datum System

22. Datum Reference Frame and Degree of Freedom

23. How to specify datum

24. Datum Target

25. Datum with MMB-LMB (Datum Shift)

26. Simultaneous Requirements  and Separate Requirements

27. Quiz #3

28. Quiz #3 and answer

Chapter 4

Orientation Tolerance

29. Parallelism

30. Perpendicularity

31. Angularity

32. Quiz #4

33. Quiz #4 and answer

Chapter 5

Position Tolerance

34. Tolerance of Position(TOP)??

35. Position without Datum

36. Composite Tolerance

37. Quiz #5

38. Quiz #5 and answer

Chapter 6

Coaxiality, Concentricity & Symmetry

39. Coaxiality

40. Concentricity (ASME Y14.5-2018 deleted)

41. Symmetry (ASME Y14.5-2018 deleted)

42. Quiz #6

43. Quiz #6 and answer

Chapter 7 Runout Tolerance

44. Circular Runout

45. Total Runout

46. Quiz #7

47. Quiz #7 and answer

Chapter 8

Profile Tolerance

48. Profile tolerance

49. Profile tolerance (Unequal Profile with U Circle and UZ)

50. Quiz #8

51. Quiz #8 and answer

Summary

52. Final Review

Final Test

53. Final Test (1 hour)

54. Final Test Answer

Welcome to GD&T journey from Rookies to Stars.

Course Curriculum

Chapter 1: Course Introduction

Lecture 1: Introduction

Chapter 2: Chapter 1 – GD&T Principles and Rules

Lecture 1: GD&T and ISO GPS Systems and Fundamental Rules

Lecture 2: Datum and Datum Selection

Lecture 3: Feature Control Frame, Tolerance Zone and TED

Lecture 4: Linear tolerance to define position

Lecture 5: Profile tolerance and Linear Tolerance

Lecture 6: Feature of Size (FOS) and Size Tolerance

Lecture 7: Maximum/Least Material Condition (MMC and LMC)

Lecture 8: Position Tolerance and Linear Tolerance

Lecture 9: Position tolerance with MMC Modifier

Lecture 10: Position tolerance with LMC Modifier

Lecture 11: Virtual Condition Boundary(VC)

Lecture 12: Envelope Requirements (Rule#1)

Lecture 13: Quiz #1

Lecture 14: Quiz #1 Answer

Chapter 3: Chapter 2 Form Tolerance

Lecture 1: Flatness

Lecture 2: Straightness

Lecture 3: Circularity

Lecture 4: Cylindricity

Lecture 5: Quiz #2

Lecture 6: Quiz #2 and answer

Chapter 4: Chapter 3 Datum and Datum System

Lecture 1: Datum Reference Frame and Degree of Freedom

Lecture 2: How to specify datum

Lecture 3: Datum Target

Lecture 4: Datum with MMB-LMB (Datum Shift)

Lecture 5: Simultaneous Requirements and Separate Requirements

Lecture 6: Quiz #3

Lecture 7: Quiz #3 and answer

Chapter 5: Chapter 4 Orientation Tolerance

Lecture 1: Parallelism

Lecture 2: Perpendicularity

Lecture 3: Angularity

Lecture 4: Quiz #4

Lecture 5: Quiz #4 and answer

Chapter 6: Chapter 5 Position Tolerance

Lecture 1: Tolerance of Position(TOP)

Lecture 2: Position without Datum

Lecture 3: Composite Tolerance

Lecture 4: Quiz #5

Lecture 5: Quiz #5 and answer

Chapter 7: Chapter 6 Coaxiality, Concentricity & Symmetry

Lecture 1: Coaxiality

Lecture 2: Concentricity(ASME Y14.5-2018 deleted)

Lecture 3: Symmetry(ASME Y14.5-2018 deleted)

Lecture 4: Quiz #6

Lecture 5: Quiz #6 and answer

Chapter 8: Chapter 7 Runout Tolerance

Lecture 1: Circular Runout

Lecture 2: Total Runout

Lecture 3: Quiz #7

Lecture 4: Quiz #7 and answer

Chapter 9: Chapter 8 Profile Tolerance

Lecture 1: Profile tolerance

Lecture 2: Profile tolerance (Unequal Profile with U Circle and UZ)

Lecture 3: Quiz #8

Lecture 4: Quiz #8 and answer

Chapter 10: Final Review

Lecture 1: Final Review

Chapter 11: Fina Test

Lecture 1: Final Test (1 hour)

Chapter 12: Bonus Video – Focusing application of knowledge

Lecture 1: How to use ISO GPS to specify the size tolerance properly

Lecture 2: How to use MMC and LMC Modifier properly in position tolerance

Instructors

Michael XU
Professional GD&T Consultant, GDTP certified by ASME

Rating Distribution

1 stars: 7 votes

2 stars: 17 votes

3 stars: 53 votes

4 stars: 153 votes

5 stars: 159 votes

Frequently Asked Questions

How long do I have access to the course materials?

You can view and review the lecture materials indefinitely, like an on-demand channel.

Can I take my courses with me wherever I go?

Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don’t have an internet connection, some instructors also let their students download course lectures. That’s up to the instructor though, so make sure you get on their good side!