Siemens NX CADCAMPost BuilderMold (CAM 2027 Interface)

Siemens NX CAD/CAM&Post Builder/Mold (CAM 2027 Interface), available at $64.99, has an average rating of 4.45, with 130 lectures, based on 141 reviews, and has 1492 subscribers.

You will learn about You will learn how to make 3D Parts. After this course, you will be able to create G code for Milling, Turning and Wire EDM operations (3 Axis & Multi Axis). Additional NX?CAM?2027 Interface sessions added to the course to be able to use the latest version. You will be professional user in NX CAM. You will learn the steps of NX Injection Mold (From start to the End). You will be able to use NX CAD for Assembly & Drafting. This course is ideal for individuals who are CAD Engineers or CAD Designer or NX Users or CAD CAM Persons or Mechanical Engineers, Technicians, Drafters or Injection Mold Engineers or Manufacturing Engineers It is particularly useful for CAD Engineers or CAD Designer or NX Users or CAD CAM Persons or Mechanical Engineers, Technicians, Drafters or Injection Mold Engineers or Manufacturing Engineers.

Enroll now: Siemens NX CAD/CAM&Post Builder/Mold (CAM 2027 Interface)

Summary

Title: Siemens NX CAD/CAM&Post Builder/Mold (CAM 2027 Interface)

Price: $64.99

Average Rating: 4.45

Number of Lectures: 130

Number of Published Lectures: 130

Number of Curriculum Items: 130

Number of Published Curriculum Objects: 130

Original Price: $99.99

Quality Status: approved

Status: Live

What You Will Learn

You will learn how to make 3D Parts.

After this course, you will be able to create G code for Milling, Turning and Wire EDM operations (3 Axis & Multi Axis).

Additional NX?CAM?2027 Interface sessions added to the course to be able to use the latest version.

You will be professional user in NX CAM.

You will learn the steps of NX Injection Mold (From start to the End).

You will be able to use NX CAD for Assembly & Drafting.

Who Should Attend

CAD Engineers

CAD Designer

NX Users

CAD CAM Persons

Mechanical Engineers, Technicians, Drafters

Injection Mold Engineers

Manufacturing Engineers

Target Audiences

CAD Engineers

CAD Designer

NX Users

CAD CAM Persons

Mechanical Engineers, Technicians, Drafters

Injection Mold Engineers

Manufacturing Engineers

Sample From reviews:

Thanks Sir..(Rating 5&)

Very Good Courses(Rating 5&)

Best course I’ve found so far, it’s clear, simple and straight to the point.(Rating 5&)

Good (Rating 5&)

Dear sir, You are a legend. I am interested in learning your subject. Thank you so much!!! (Rating 5&)

Courses are very useful, Thanks Sir, hope to continue in all CAD CAM programs with the same way of explanation (Rating 5&)

Thank u, Nice Course, Thanks for your effort (Rating 5&)

Thanks, Nice Course (Rating 5&)

Very nice courses, Thanks (Rating 5&)

Thank you Sir (Rating 5&)

Very good courses, and nice experience (Rating 5&)

nice!!!! (Rating 5&)

GREAT Course! Thank you so much!(Rating 5&)

Good Experience(Rating 5&)

The best cad cam course(Rating 5&)

Good CAM Course(Rating 5&)

Best CAD CAM course(Rating 5&)

Nicee(Rating 5&)

Course Main Contents (5 Courses!):

Course 1:               NX CAD (Modelling – Assembly – Drafting)

Course 2:              NX Sheet Metal

Course 3:              NX CAM (Milling – Turning – Wire EDM) + NX 2027 CAM Interface

Course 4:              NX Post Builder

Course 5:              NX Mold Wizard

NX Package Contents:

                     NX CAD Sketching

                     NX CAD Sketching Exercises

                     NX CAD Modelling

                     NX CAD Modelling Exercises

                     NX Synchronous Modelling

                     NX Surface Creation

                     NX CAD Assembly & Drafting

                     NX Sheet Metal

                     NX Sheet Metal Exercises

                     NX CAM Milling (3Axis)

                     NX CAM Milling Multi Axis (4,5 Axis)

                     NX CAM Turning

                     NX CAM Drilling (3 Axis & Multi Axis)

                     NX CAM Wire EDM

                     NX CAM Millturn

                     NX Post Builder (3 Axis & Multi Axis)

                     NX Injection Mold (From start to the End)

                     NX 2027 CAM Interface (New Additional Sessions)

Description

After this course, you will be able to use the NX CAD / CAM & Post Builder to do Modelling & Machining for any Part and to use NX CAM with any CNC Machines.

After this course, you will be able to create G code for Milling, Turning and Wire EDM operations (3 Axis & Multi Axis).

You will be professional user in NX CAM.

Introduction to the components of the Mold

Mold Wizard is a collection of tools that assist you by automating common

mold design tasks.

You will learn the steps of NX Injection Mold (From start to the End)

You will be able to use NX CAD for Assembly & Drafting

After this course, you will be able to use the NX Mold Wizard to do any injection mold part.

Additional NX CAM 2027 Interface sessions added to the course to be able to use the latest version.

Notes:

You will download all parts that we used during the course and more parts for practice.

The implementation of this course is in NX 11 but you will be able to implement using any version.

Additional NX CAM 2027 Interface sessions added to the course to be able to use the latest version.

You will have full technical support with me.

Weekly additional Exercise will be added to the course according to students requirements (If Required).

Course Curriculum

Chapter 1: Introduction

Lecture 1: Introduction

Lecture 2: NX Interface and Concept

Chapter 2: Sketching

Lecture 1: NX Sketch 1

Lecture 2: NX Sketch 2

Lecture 3: NX Sketch Constrains

Lecture 4: NX Sketch Ex

Chapter 3: Modelling

Lecture 1: NX Extrude 1

Lecture 2: NX Extrude 2 and Revolve

Lecture 3: NX Extrude Ex

Lecture 4: NX Revolve Ex

Lecture 5: NX Edge Blend, Draft, Shell, Trim Body, Chamfer, Hole

Lecture 6: NX Exercise 1 Modeling

Lecture 7: Emboss, Emboss Body, Extract Geometry

Lecture 8: Emboss, Emboss Body, Offset Emboss, Groove

Lecture 9: Trim Sheet, Split body, Trim and Extend, Extend Sheet, Divide face, Delete Body

Lecture 10: Offset Face, Offset Surface, Variable Offset, Thicken, Bounding body, Scale Body

Lecture 11: Project curve, Offset Curve, Offset Curve on face

Lecture 12: Intersection Curve, Bridge Curve, Ispparametric Curve, Helix, Tube, Swept

Lecture 13: Isoparametric Curve, Combined Projection, Curve on surface

Lecture 14: Extract Virtual curve, Isocline Curve

Lecture 15: Sweep Features

Lecture 16: Additional Features – Dart, Block, Sphere, Cyl, Cone

Lecture 17: Modeling Exercise 1

Lecture 18: Modeling Exercise 2

Lecture 19: Modeling Exercise 3

Lecture 20: Modeling Exercise 4

Lecture 21: Modeling Exercise 5

Chapter 4: Surface Creation Basics

Lecture 1: Surface Through Curves

Lecture 2: Surface Through Curves Mesh

Lecture 3: Studio Surface, Fill Surface

Lecture 4: Law Extension, Extension

Lecture 5: Law Extension, Silhouette Flange

Lecture 6: N-Sided Surface

Lecture 7: Four Points Surface, Surface Through Points

Chapter 5: Synchronous Modelling

Lecture 1: Synchronous Modelling

Chapter 6: Assembly & Drafting Overview

Lecture 1: Assembly 1

Lecture 2: Assembly 2

Lecture 3: Assembly 3

Lecture 4: Drafting Overview

Lecture 5: Drafting Title Block

Chapter 7: NX CAM & Post Builder

Lecture 1: NX CAM & Post Builder Introduction

Lecture 2: CAM General Steps (3 Axis Rough & Finish Operations)

Chapter 8: Milling 3 Axis Operations (Roughing & Finishing)

Lecture 1: 3 Axis Rough Operations (Plunge Milling)

Lecture 2: 3 Axis Rough Operations (Corner Rough)

Lecture 3: 3 Axis Planar operation and Planar with IBW

Lecture 4: 3 Axis Face Milling operation and Face Milling Manual

Lecture 5: 3 Axis Finish Operations (Z Level Profile)

Lecture 6: 3 Axis Finish Operations (Z Level Corner Finish)

Lecture 7: 3 Axis Finish Operations (More Operations)

Lecture 8: 3 Axis Finish Operations (Another Example)

Lecture 9: 3 Axis Finish Operations (Another Example)

Chapter 9: Milling Multi Axis Operations & Machine Simulation

Lecture 1: Multi axis Finish Operations (Streamline operation)

Lecture 2: Multi axis Finish Operations (Tool Axis Control-1)

Lecture 3: Multi axis Finish Operations (Tool Axis Control-2)

Lecture 4: Multi axis Finish Operations (Tool Axis Control-3)

Lecture 5: Multi axis Finish Operations (Tool Axis Control-4)

Lecture 6: Multi axis Finish Operations (Tool Axis Control-5)

Lecture 7: Multi axis Finish Operations (Z Level 5 Axis Operation 1)

Lecture 8: Multi axis Finish Operations (Z Level 5 Axis Operation 2)

Lecture 9: Multi 4 axis Finish Operations (Streamline operation) with Machine Simulation

Chapter 10: Drilling & Wire EDM Operations

Lecture 1: Drilling Operations

Lecture 2: Wire EDM Operation

Chapter 11: Cutting Parameters & Non-Cutting Moves

Lecture 1: Cutting Parameters & Non-Cutting Moves part 1-2

Lecture 2: Cutting Parameters & Non-Cutting Moves part 2-2

Chapter 12: Blank & Tool Creation and Cut levels option

Lecture 1: Cut Levels

Lecture 2: Cut Levels Ranges

Lecture 3: Blank & Tool Creation

Chapter 13: Turning Operations Basics

Lecture 1: Turning Operations 1

Lecture 2: Turning Operations 2

Chapter 14: Post Builder Basics

Lecture 1: Post Builder 3 Axis Milling

Lecture 2: Post Builder Multi Axis Milling

Lecture 3: Post Builder Fanuc Example

Chapter 15: NX CAM Projects

Lecture 1: Project 1 Milling 3 Axis

Lecture 2: Project 2 Milling Multi Axis

Lecture 3: Project 3 Turning Operations

Lecture 4: Project 4 Drilling Operations

Lecture 5: Project 5 Feature Based Machining

Lecture 6: Project 6 General Milling & Drilling Operations

Lecture 7: Project 7 – Multi Blade operations

Lecture 8: Project 8 Milling Multi Axis with different Tool Axis positions

Lecture 9: Project 9 Hole Milling & Thread Milling

Lecture 10: Project 10 Groove Milling

Lecture 11: Project 11 Millturn Operations

Lecture 12: Project 12 Milling 3 Axis & Indexing

Chapter 16: NX CAM 2027 (Latest Version) Interface

Instructors

Mohamed Gamal
BIM Project Manager & CAD CAM Specialist

Rating Distribution

1 stars: 1 votes

2 stars: 2 votes

3 stars: 7 votes

4 stars: 18 votes

5 stars: 113 votes

Frequently Asked Questions

How long do I have access to the course materials?

You can view and review the lecture materials indefinitely, like an on-demand channel.

Can I take my courses with me wherever I go?

Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don’t have an internet connection, some instructors also let their students download course lectures. That’s up to the instructor though, so make sure you get on their good side!